|
FullDip 400ml Aerosol
1 Nozzle Included
Gloss finish
Recommended BASE : N/A |
| | 4 Litre sprayable FullDip liquid vinyl / wrap
ready to spray and use |
| | FullDip® 400ml Aerosol
1 Nozzle Included
Recommended base: - N/A |
|
|
24cm long (9")
13cm wide (5 1/2")
5cm high (2") |
| | 311gr / 400ml Aerosol
Recommended BASE : N/A
Genuine USA made PlastiDip aerosol.
Glossy finish.
Designed to go over ANY colour and make it glossy.
|
| |
FullDip 400ml Aerosol
1 Nozzle Included
Recommended BASE : N/A
Fuel and Scratch RESISTANT
Can be polished
We recommend this for a SEMI-Permanent OEM Gloss finish - can be removed but requires further steps |
|
|
Fuel and scratch resistant Peelable High Gloss
You can flat and polish this (we recommend 2 wet coats if flatting and polishing).
NOT designed for DIY use. PRO Gloss
Requires a compressor setup to do properly |
| |
Full Dip Glossifier
4 litres |
| |
Fuel and scratch resistant Peelable Matte (Satin look)
NOT designed for DIY use. PRO Matte (Satin look)
Requires a compressor setup to do properly |
|
| PlastiDip Spray - Ready To Spray
GENUINE USA made dip
Factory sealed tin |
| |
FullDip 400ml Aerosol
1 Nozzle Included
Recommended BASE : N/A
Fuel and Scratch RESISTANT
We recommend this for a SEMI-Permanent OEM Matte finish |
| |
Full Dip Satin
4 litres
Designed for DIY and PRO use
For use on own, or with our tinters and pigments |
|
|
Fuel and scratch resistant Peelable High Gloss
You can flat and polish this (we recommend 2 wet coats if flatting and polishing).
NOT designed for DIY use. PRO Gloss
Requires a compressor setup to do properly
Ultra High Solids. MUCH better for sanding and polishing up or flow-coating. |
| | Matt-Pack Peelable Spray Wrap
1 Litre
Ready for Use
CLEAR SATIN |
| | Matt-Pack Peelable Spray Wrap
5 Litre
Ready for Use
CLEAR SATIN |
|
|
Fuel and scratch resistant Peelable High Gloss
You can flat and polish this (we recommend 2 wet coats if flatting and polishing).
NOT designed for DIY use. PRO Gloss
Requires a compressor setup to do properly
Ultra High Solids. MUCH better for sanding and polishing up or flow-coating. |
| |
Fuel and scratch resistant Peelable High Gloss
You can flat and polish this (we recommend 2 wet coats if flatting and polishing).
NOT designed for DIY use. PRO Gloss
Requires a compressor setup to do properly
Ultra High Solids. MUCH better for sanding and polishing up or flow-coating. |
| |
Fuel and scratch resistant Peelable High Gloss
You can flat and polish this (we recommend 2 wet coats if flatting and polishing).
NOT designed for DIY use. PRO Gloss
Requires a compressor setup to do properly
Ultra High Solids. MUCH better for sanding and polishing up or flow-coating. |
|
