FullDip Wheel Kit - KINGSLEY BLUE - Matte

Wheel Kit to dip / change the colour of your wheels

MATTE finish, unless add one of the two optional glosses.

Kit comes with;

• 2x Matte PRIMER GREY 400ml FullDip Aerosols
• 3x Matte KINGSLEY BLUE 400ml FullDip Aerosols

How?

Follow these steps to do your wheels;

1. Remove the wheels from car/bike
2. Jet-wash / hand wash and make them cleaner than they were new. Failure to clean 100% (yes, even in the annoying corners of spokes!) will lead to a failure of the dip.
3. We recommend you then Pre Dip the wheels and tyre faces using our pre-dip and microfibre cloth from the our shop
4. Mask the tyres with 2″ (optional extra)
5. Pre-Dip the wheel again
6. Dip the wheels with chosen colours in recommended order.
7. Leave for minimum of 8 hours then apply chosen gloss (optional)
8. Leave for 12 hours, remove tape and refit wheels. Be careful not to damage the dip sliding over the wheel studs, or fitting the wheel bolts.